Hall Technologies UV8-S Video and Phantom Power over UTP Extender

ITEM #: HRT-UV8-S MFG #: UV8-S

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the HRT-UV8-S

UV8-S - Overview

The Model UV8-S is a 4-channel video splitter that can send a VGA or component video signal to multiple displays on CATx cable. This unit features a standard HD15 VGA connector for the input and has 8 RJ45 connectors for the outputs. It also provide an additional HD15 VGA connector for a local monitor.
The UV8-S can drive UTP cables of lengths up to 500 feet. At the remote (receiving) end of the cable, a model # UV1-R is required to convert the UTP cable signal back to video for connection to a monitor.
In most setups only one power supply is necessary for the entire system.

The UV8-S Sender/Splitter comes with a power supply that is capable of powering itself and all the UV1-R receivers.

For Cat5 runs of over 300 feet, the receivers may need their own additional supplies that must be ordered separately (HRT model # 511-GS569).

Made in the USA.

Note: Front and back of Sender is pictured. Receiver is sold separately.

  • Features:

    • Support for local monitor at transmitter
    • Multiple Cat-5 outputs
    • Transmit video and phantom power on a single CATx cable
    • Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for high-resolution video extension
    • Amplifies the signal for clean and crisp transmission
    • Differential signaling eliminates ground loops and noise
    • Handles resolutions up to 1920x1440 at 60Hz
    • Rugged, Reliable, Compact size
    • Single power supply fpr transmitter and all UV1-R receivers (under 300 ft)
    • Drive standard CATx cables to 500 feet for VGA and Component Video
     
  • GTIN:

    0724696530077
     

UV8-S - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov