Showing:

The Ebtech Hum X filters out unwanted voltage on the ground line that can cause ground loop hum. Simply place the Hum X on the end of the power cord of the equipment that has a Ground Loop and plug the Hum X into the wall outlet. Ground Loop is gone and audio signal remains intact. Easy to use, easy to install, absolutely safe and completely effective! Features: Gets Rid of GROUND RELATED hum/buzz right at the Source! Suitable for use on 120V 60Hz grounded USA style power outlets. NOT A GROUND...

The Ebtech CT 6-in-1 Cable Tester is the professional's choice for multifunction cable testers. It displays the exact wiring of any cable or adapter and even allows testing of cables installed inside building walls. Intermittent detection allows you to wiggle a cable like crazy and know if an intermittent connection exists at any time. The LED's will show which wire has problem and what type of problem it is. With the added functions of test tone generation (Switchable 1KHz or 440Hz at -4dBu,...

Ebtech's Hum Eliminators use custom Isolation Transformers to break loop antenna that causes ground hum and buzz. The Hum Eliminator also converts back and forth between balanced and unbalanced connections and prevents the cable from acting as an antenna for noise. Simply place a channel of the Hum Eliminator on the cable connections between the two offending pieces of equipment. Ebtech Hum Eliminator's will not affect the quality of the audio, it will improve it. Features 1/4" smart jacks that...

The LLS-2 allows you to use equipment with different line level requirement at their correct gain settings. This reduces noise and makes -10dBv equipment compatible with +4dBu equipment. It is bidirectional and works with balanced or unbalanced signals at either end. Equipped with Ebtech's TRS Smart Jacks, just plug and go. All passive design guarantees you the best possible performance. Also available in a 2 channel box with XLR jacks or an 8 channel single space rack with either 1/" or XLR jacks....

The Line Level Shifter's primary function is to increase or decrease signal voltage back and forth between -10dBV and +4dBu (depending on which way you route through it). The Line Level Shifter also breaks loop antenna that causes ground hum and buzz as well as converting back and forth between balanced and unbalanced connections and preventing the cable from acting as an antenna for noise. Simply place a channel of the Line Level Shifter on the cable connections between the two mismatched pieces...