Where to Buy ESE | Countdown Timers | GPS Clocks

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

ESE DV-222 Dual 1 x 4 3G/HD/SD SDI Reclocking Distribution Amplifier
Item# ESE-DV-222
The ESE DV-222 is an SDI digital video (3G, HD & SD) Dual 1 x 4 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-222 automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. A non-reclocked loop output is also provided. An external power supply is not required as the DV-222...
Our Price: $749.45
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-410 GPS Based Frequency Generator
Item# ESE-ES-410
The ES-410 generates a stable source of 10 MHz and 1 PPS using GPS (Global Positioning System) satellites as a reference. The unit provides 10 MHz in both Sine Wave and Square Wave (5 volt logic) form, four Sine Wave and four Square Wave outputs are provided. The 1 PPS output is a 50% duty, 5 volt logic signal, positive-edge coinciding with the UTC seconds change. An ESE TC90 Time Code output is also provided for driving remote time displays. A USB interface allows configuration...
Our Price: $1,764.24
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-160F/NTP6 Master Clock w/ NTP6 Opt - NTP Server Allows Sync of Computer networks & LAN Control - IPv6 Compatible
Item# ES-160F-NTP6
The ESE ES-160F-NTP6 is a crystal-based Master Clock / Time Code Generator with the NTP6 Option. NTP Time Server: Network Time Protocol Output with IPv6 & Network Control input via Ethernet (10/100Base-T, RJ-45). The unit employs a temperature compensated crystal oscillator (TCXO) which provides the ES-160F with an accuracy of one second per month. Six .56" yellow LED's display the real time or date while the unit simultaneously generates several types of time code. The unit provides a Coin...
Our Price: $2,039.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-976 Time Code Remote Display - Red LED
Item# ESE-ES-976
The ES-976 is a Time Code display featuring 7" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (9" H x 43" W x 3.5" D). The unit accepts, via the rear-mounted terminal block or BNC connector, either ESE Time Code (TC76, TC89, or TC90), SMPTE LTC Time Code, EBU Time Code or RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud). The ES-976 will automatically determine which code is being received. If receiving ESE Time Code from a timer, the unit...
Our Price: $1,100.66
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE HD-455/SD/1 HD & SD SMPTE Time Code Reader/Video Inserter
Item# ESE-HD-455-SD-1
The HD-455/SD/1 is an HD & SD Timecode Reader/Video Inserter. The unit reads SMPTE-LTC/EBU (bi-directionally from 1/30th to 20x play speed), D-VITC or RP-188 and inserts that timecode onto an SDI video signal. The timecode can also be embedded into the D-VITC or RP-188. Error detection/correction for LTC may be enabled for reading analog audio tracks, or disabled for reading SMPTE Up/Down Timers. Additionally, up to 30 characters of user defined text may be inserted into the...
Our Price: $1,995.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 103F GPS Master Clock/Time Code Generator - IRIG-B / ASCII (RS-232 & USB) - 1 3/4 Inch Rackmount
Item# ESE-ES-103F
The ESE ES-103F is a GPS Master Clock/Time Code Generator. The unit receives accurate time and date information from Global Positioning System satellites and displays nine digits of time (Day of Year, Hour, Minute & Second). Simultaneously, the ES-103F generates several types of time code including ESE-TC90/TC89 (selectable), ASCII (RS-232C & USB), IRIG-B and a 1PPS signal. These outputs allow the ES-103F to easily interface with new or existing computers, automation and clock systems. A...
Our Price: $1,559.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-943U Universal Time Code Remote Display - RED LED Display
Item# ES-943U
4 Colors Available
The ESE ES-943U is a Time Code display featuring 4.0" bright red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 26" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T), SMPTE/EBU Time Code or RS-232C ASCII Time Code(format "0", "1" or "A" at 9600 baud). The ES-943U will automatically determine which code is being received. A rear-mounted DIP switch is used to configure the...
Read More
Our Price: $831.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-251 1x24 RS-232 Distribution Amplifier
Item# ESE-251
The ES-251 is an RS-232-C Isolation and Distribution Amplifier. Three 1 x 8 amplifier circuits allow the incoming signal to be distributed via the 24 outputs. The unit receives RS-232-C and buffers the signal so that each of the 24 outputs can drive a single "user" at a distance of up to 50 feet (per output). All inputs and outputs are via rear mounted terminal DB-9 connectors. The two main purposes of the ES-251 are to: 1) improve the distribution capabilities of RS-232-C 2) provide isolation...
Our Price: $1,420.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-289E/P/UL Time Code Referenced NTP Time Server with 19 Inch Rack Mount and UL Approved Wall Mount Power Supply
Item# ESE-ES-289E-P-UL
The ES-289E provides a practical method of putting accurate time information onto a network. The unit reads ESE or SMPTE/EBU time codes. The NTP output is provided on a 10/100 Base-T Ethernet connector. The ES-289E is housed in a rugged black anodized desktop enclosure. A voltage-controlled temperature-compensated crystal oscillator is used to maintain the accuracy of the time code outputs when lock is lost. The ES-289E is an IPV4/IPV6 compatible NTP Time Server. NTP clients can...
Our Price: $1,096.05
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-943U Universal Time Code Reader - 6-digit - 4 inch Red LED Display in Wall Mount Enclosure w/ Option NTP-C
Item# ESE-ES-943U-NTP
The ESE ES-943U/NTP-C is a Time Code display featuring 4.0" bright red LED displays & Option NTP-C (. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 26" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T), SMPTE/EBU Time Code (Time of Day only) or RS-232C ASCII Time Code(format "0", "1" or "A" at 9600 baud). The ES-943U will automatically determine which code is being received. A rear-mounted DIP...
Our Price: $885.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-250 1x24 RS-232 ASCII Distribution Amplifier
Item# ESE-ES-250
The ES-250 is an RS-232-C Isolation and Distribution Amplifier. Three 1 x 8 amplifier circuits allow the incoming signal to be distributed via the 24 outputs. The unit receives RS-232-C and buffers the signal so that each of the 24 outputs can drive a single “user” at a distance of up to 50 feet (per output). All inputs and outputs are via rear mounted terminal block connectors. The two main purposes of the ES-250 are to: 1) improve the distribution capabilities of RS-232-C 2) provide isolation...
Our Price: $945.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE DV-212 1x12 3G/HD/SD SDI Digital Video Distribution Amplifier
Item# ESE-DV212
The DV-212 is an SDI digital video (3G, HD & SD) 1 x 12 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-212 automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. A non-reclocked loop output is also provided. An external power supply is not required as the DV-212 is completely...
Our Price: $850.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 996U NTP-C P 6-Digit Clock with NTP-C with 2.3in High Red LED Display and 19 Inch Rack Mount Option
Item# ESE-ES-996UNTPCP
The ESE ES-996U/NTP-C-P is an NTP Time Display featuring 2.3" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (5" H x 15" W x 3.5" D). The unit accepts an Ethernet connection via the rear-mounted RJ-45 connector and is set to synchronize with an NTP server. All setup features (IP address, time zone offset, etc.) are configured through a Web Page Control Panel interface. Included Option: P: 19" Front Panel (Rack Mount): Designed for mounting...
Our Price: $720.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-210 Quad 1x6 10 MHz Distribution Amplifier
Item# ESE-ES-210
The ESE ES-210 provides four independent 1x6 Frequency DA's in a single rack-mount enclosure. Each DA has loop-thru inputs and six isolated outputs, all accessible via BNC connectors. Screwdriver-adjustable Gain controls are provided on the front of the case. The Gain control provides an overall signal level adjustment of -1.6 to +3.4 db. Unused outputs need not be terminated. Features: Four Independent Amplifier Channels BNC connectors Loop-thru output 6 isolated outputs per channel...
Our Price: $660.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-993U-NT 2.3 Inch 6-Digit (Hr Min & Sec) ESE/SMPTE/EBU/ASCll Time Display 12 Inch - Red
Item# ES993U-NTPCPOE-R
The ESE ES-993U/NTP-C is an NTP Time Display featuring 2.3" high (Hours & Minutes) and 1" high (Seconds) LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (5" H x 12" W x 3.5" D). The unit accepts an Ethernet connection via the rear-mounted RJ-45 connector and is set to synchronize with an NTP server. All setup features (IP address, time zone offset, etc.) are configured through a Web Page Control Panel interface. *Note: This version is the ES-993U with...
Our Price: $653.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE LX 5112U-NTP-C/PoE Self-Setting 12 Inch Analog Clock with NTP-C/PoE Option
Item# ESE-LX5112UNTPCP
The LX-5112U is a Wall Mount Analog Clock with a 12" viewing diameter. The LX-5112U is designed to operate as a Time Code Reader or Stand-Alone Clock. It can read, decode and display time information from most any Master Clock or other source of time code. The clock will display time as received from a source of SMPTE/EBU, ASCII (format 0, 1, 8 or A) or ESE Time Code. After a very simple "set-up" procedure and receipt of time code, the unit automatically sets itself to the exact...
Our Price: $588.87
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-996U 2.3 6 Digit Serial Slave
Item# ES 996U
The ES-996U is a Time Code display featuring 2.3" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (5" H x 15" W x 3.5" D). The unit accepts, via the rear-mounted terminal block (BNC connector on rack-panel units), either ESE Time Code™ (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-996U will automatically determine...
Our Price: $650.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-993U 6-digit - 2.3 Inch Amber LEDs w/ 1 Inch Seconds Display - Wall Mount Enclosure Time Code Remote Display
Item# ES 993U
The ES-993U is a Time Code display featuring 2.3" high (Hours & Minutes) and 1" high (Seconds) amber LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure(5" H x 12" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time CodeT (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-993U will automatically determine...
Our Price: $598.95
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-246/BNC Quad 1x6 SMPTE-LTC/IRIG Distribution Amplifier - BNC Option
Item# ES-246-BNC
The ES-246/BNC is a Quad 1 x 6 SMPTE-LTC / IRIG Time Code Distribution Amplifier. It is housed in a 1.75" x 19" rackmount panel and chassis (the chassis extends 4.8" behind the panel). Each amplifier provides a loop-thru input and six 600 ohm outputs. The inputs and outputs are connected via the rear mounted BNC connectors. The ES-246/BNC is a transformerless design that takes a single unbalanced input and provides six unbalanced single ended outputs. The output levels for each of the four inputs...
Our Price: $542.45
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 249 1x8 ASCII RS232 Time Distribution Amplifier
Item# ES-249
The ES-249 is designed to accept an RS232C/ASCII signal and output up to eight identical copies.The unit has a single input and eight outputs that are accessible on rear-mounted 9-pin D-sub connectors. Due to the nature of the RS232Csignal, if long runs of cable are required, it may be necessary to distribute a different time code that is then "translated" into RS232C/ASCII before entering the "user." Features: Use for distributing ASCII Time Codes 8 isolated outputs Male DB-9 Input connector Female...
Our Price: $565.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES-362UE/N/P 100 Minute Master Up/Down Timer with N and P options
Item# ESE-ES-362UE-N-P
The ESE ES-362UE is a 100 Minute Up/Down Timer. It is housed in an aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted DB-9 connector provides access to remotely control...
Our Price: $489.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 247E Quad 1x6 Rack Mount Composite Video DA 1 RU w/ Option - CLEAR (Silver faceplate) - BNC Connectors
Item# ES 247E
2 Colors Available
The ESE ES-247E Provides four independent 1x6 Video DA's in a single rack-mount enclosure. Each DA has loop-thru inputs and six isolated outputs, all accessible via BNC connectors. Screwdriver-adjustable Gain and Equalization controls are provided on the front of the case. Up to 1000 feet of cable may be compensated by adjusting the EQ trimmer. The Gain control provides an overall signal level adjustment of - 2 to +3 db. When the input is not looped thru to other equipment, a 75 ohm terminator should...
Read More
Our Price: $470.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ESE ES 362UEP 100 Minute Up-Down Timer with Rackmount Option
Item# ESE-ES-362UEP
The ESE ES-362UE is a 100 Minute Up/Down Timer. The ES-362UE is housed in an aluminum/plastic case. The timer is presettable via the front-mounted thumbwheel switch. Up, Down, Stop, Reset-to-zero, and Preset controls are provided on the top of the case. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays. Up to 100 slave displays may be driven, using up to 4000 feet of coaxial cable or twisted pair. A rear-mounted DB-9 connector provides access to remotely...
Our Price: $463.55
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES-208A 1x12 Video Distribution Amplifier
Item# ESE-ES-208A
The ESE ES-208A provides a loop-thru input and twelve isolated outputs, all accessible via BNC connectors. Screwdriver-adjustable Gain and Equalization controls are provided on the front of the case. Up to 1000 feet of cable may be compensated by adjusting the EQ trimmer. The Gain control provides an overall signal level adjustment of -2 to +3.4 db. When the input is not looped thru to other equipment, a 75 ohm terminator should be used on the free input connector. Unused outputs need not...
Our Price: $285.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ESE ES 808/120 8 Port Power Injector for Power over Ethernet/120 Watt Power Supply
Item# ESE-ES-808-120
ESE ES 808/120 is an 8-port Power Injector for Power over Ethernet (PoE) devices. The unit accepts an Ethernet data signal and passes through the identical signal along with 48 VDC "injected" into the RJ-45 Ethernet connector using the Spare Pair. This unit injects power passively. Applied voltage is available all the time, there is no autonegotiation with the attached client device. These devices have no switching function - there is no configuration needed, and VLANs and other management...
Our Price: $170.30
Availability: Typically Ships in 3-10 Business Days
Add to Wish List

ESE was founded in 1971 in El Segundo, California and since day one, ESE has maintained the ability to customize products to meet a customer's specific requirement. As of the year 2000, ESE has designed and built more than 2200 different "Specials". These Specials are sometimes a simple modification to an existing product while on many occasions require that a brand new unit be designed from scratch.

Today, ESE's line of products consists of eleven product "families" including "Master Clocks Systems"

ESE

By Category

By Price Range

Filter By

Narrow Products

By Category

By Price Range

Filter By

ESE DV-222 Dual 1 x 4 3G/HD/SD SDI Reclocking Distribution Amplifier

ESE ES-410 GPS Based Frequency Generator

ESE ES-160F/NTP6 Master Clock w/ NTP6 Opt - NTP Server Allows Sync of Computer networks & LAN Control - IPv6 Compatible

ESE ES-976 Time Code Remote Display - Red LED

ESE HD-455/SD/1 HD & SD SMPTE Time Code Reader/Video Inserter

ESE ES 103F GPS Master Clock/Time Code Generator - IRIG-B / ASCII (RS-232 & USB) - 1 3/4 Inch Rackmount

ESE ES-943U Universal Time Code Remote Display - RED LED Display

ESE ES-251 1x24 RS-232 Distribution Amplifier

ESE ES-289E/P/UL Time Code Referenced NTP Time Server with 19 Inch Rack Mount and UL Approved Wall Mount Power Supply

ESE ES-943U Universal Time Code Reader - 6-digit - 4 inch Red LED Display in Wall Mount Enclosure w/ Option NTP-C

ESE ES-250 1x24 RS-232 ASCII Distribution Amplifier

ESE DV-212 1x12 3G/HD/SD SDI Digital Video Distribution Amplifier

ESE ES 996U NTP-C P 6-Digit Clock with NTP-C with 2.3in High Red LED Display and 19 Inch Rack Mount Option

ESE ES-210 Quad 1x6 10 MHz Distribution Amplifier

ESE ES-993U-NT 2.3 Inch 6-Digit (Hr Min & Sec) ESE/SMPTE/EBU/ASCll Time Display 12 Inch - Red

ESE LX 5112U-NTP-C/PoE Self-Setting 12 Inch Analog Clock with NTP-C/PoE Option

ESE ES-996U 2.3 6 Digit Serial Slave

ESE ES-993U 6-digit - 2.3 Inch Amber LEDs w/ 1 Inch Seconds Display - Wall Mount Enclosure Time Code Remote Display

ESE ES-246/BNC Quad 1x6 SMPTE-LTC/IRIG Distribution Amplifier - BNC Option

ESE ES 249 1x8 ASCII RS232 Time Distribution Amplifier

ESE ES-362UE/N/P 100 Minute Master Up/Down Timer with N and P options

ESE ES 247E Quad 1x6 Rack Mount Composite Video DA 1 RU w/ Option - CLEAR (Silver faceplate) - BNC Connectors

ESE ES 362UEP 100 Minute Up-Down Timer with Rackmount Option

ESE ES-208A 1x12 Video Distribution Amplifier

ESE ES 808/120 8 Port Power Injector for Power over Ethernet/120 Watt Power Supply

Sign In

ESE

Narrow Products

By Category

By Price Range

Filter By