Where to Buy Hosa Technology | Snakes, Stage Boxes, Adapters

Viewing Item(s):

Display

Show As

Hosa SLW-333 Audio Signal Selector
Item# SLW-33
Switch back and forth, noiselessly, between up to three powered monitors. The versatile design has 1 IN (source) and 3 OUT (destination), but can be used in reverse to give you 3 IN (multiple sources) to 1 OUT (a single destination). The SLW-33 provides 1/4" Tip-Ring-Sleeve (TRS) phone jacks for easy connecting. No power required. Rugged metal enclosure.
Our Price: $146.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Hosa ATT-448 XLR Female to XLR Male 20/30/40dB Mic Attenuator
Item# ATT-448
This switchable input attenuator is great for stepping-down input level to a mixer when the level is too hight. Maybe you've got a hot microphone in front of a loud source, and you're "pegging the meters" at the board. Just insert the ATT-448 attenuator in the line between the mic and the board, and switch in the appropriate amount of attenuation to match the level the board wants to see. You can choose 20, 30, or 40dB of signal reduction, for a wide range of uses on stage and in the studio.
Our Price: $34.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Hosa ODL 312 OPT-S/PDIF AES-EBU Converter
Item# ODL-312
Mix-down or transfer of digital recordings from one manufacturer's digital recorder to another's isn't always straightforward. Some digital work stations, sound cards or DAT recorders have S/PDIF optical outputs, and some offer only AES/EBU inputs, or vice versa. The ODL-312 by Hosa is a high quality, converter, allowing simultaneous transfer of two channels of digital audio in either format in both directions. the Hosa ODL-312 converts between AES/EBU (XLR) and S/PDIF (TOSlink fiber optic). With...
Our Price: $229.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
XLR Female to 3.5mm Stereo Mini 600 Ohm to 2.5K Ohm Line Matching Transformer
Item# MIT-156
XLR 3-Pin Female to 3.5 mm TRS male. 1.5 ft Matches 600 Ohm output to 2.5K input and may be used to connect a microphone to a portable recordingdevice, camcorder, or PC.
Our Price: $35.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Hosa GLT-255 XLR3F to XLR3M Ground Lifter (Pin 1 is Lifted)
Item# GLT-255
This adaptor is designed to eliminate interference associated with ground loops. Pin 1 is lifted resulting in an ungrounded signal. Features: Defeats the ground in balanced and un-balanced audio lines. Can stop humming and buzzing caused by ground loops. No ground to chassis.
Our Price: $9.95
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
Hosa DIB-443 Sidekick Passive DI Box 1/4 in TS to XLR3M
Item# DIB-443
The Sidekick Passive DI Box by Hosa Technology makes it easy to connect your guitar, bass, or keyboard directly to a mixing console! It features an isolation transformer that transforms an instrument-level signal to a line-level signal. It works with each of the following: Electric guitars, basses, and keyboards Pedal effects and effects processors Any electronic musical instrument with a mono phone output Use the Sidekick to "go direct" for a pure, clean, noise-free tone that is perfect...
Our Price: $38.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Hosa - Coaxial (RCA) to AES/EBU (XLR Connectors)The CDL-313 24 Bit 96K
Item# CDL-313
Mix-down or transfer of digital recordings from on manufacturer's digital recorder to another's ins't always straight forward. Some manufacturers' Digital Work Stations, sound Cards or DAT recorders have only S/PDIF outputs, and some offer only AES/EBU inputs, or vice versa. The CDL-313 by Hosa is a high quality, digital link, allowing simultaneous transfer of two channels of digital-audio in either to both directions between AES / EBU (XLR) and S/PDIF (RCA). Now, even though some digital recorders...
Our Price: $172.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Hosa MHR-122 Spring Clamp Type Mic Clip
Item# MHR122
Hosa MHR-122 is a spring clamp type made for microphones. Features: Spring clamp type microphone clip, fits virtually any microphone Adjustable angle, brass insert with 5/8"-27 thread 3/8" Female to 5/8" Male threaded adapter included Black
Our Price: $6.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Mic Holder For 4 Ball Style Microphones
Item# MMH-346
Universal microphone holder allows convenient access to 4 ball microphones. Slots provide easy cable routing for a speedy setup during press conferences, interviews and more! Mounts on standard microphone stand. (Microphones and stand not included)
Our Price: $45.95
Availability: In Stock
Add to Wish List

Hosa Technology, Inc.

By Category

By Price Range

Filter By

Narrow Products

By Category

By Price Range

Filter By

Hosa SLW-333 Audio Signal Selector

Hosa ATT-448 XLR Female to XLR Male 20/30/40dB Mic Attenuator

Hosa ODL 312 OPT-S/PDIF AES-EBU Converter

XLR Female to 3.5mm Stereo Mini 600 Ohm to 2.5K Ohm Line Matching Transformer

Hosa GLT-255 XLR3F to XLR3M Ground Lifter (Pin 1 is Lifted)

Hosa DIB-443 Sidekick Passive DI Box 1/4 in TS to XLR3M

Hosa - Coaxial (RCA) to AES/EBU (XLR Connectors)The CDL-313 24 Bit 96K

Hosa MHR-122 Spring Clamp Type Mic Clip

Mic Holder For 4 Ball Style Microphones

Sign In

Hosa Technology, Inc.

Narrow Products

By Category

By Price Range

Filter By