Showing:

Anti-Slip Rubber Pad Kit for FastLane FL1X1.5 Lightweight Drop-Over Cable Protectors
Includes 18 Anti-Slip Rubber Pads
Helps keep cable protectors in place on concrete and other hard or slick surfaces

A cost effective carry-and-go 5-channel cable ramp crossover for location work where vehicle and pedestrian traffic would pose harm to your cable investment. Serious weight capacity - up to 20,000 lbs. - withstands even the largest trucks and gear transporters. The CRSX-2 is molded from vulcanized rubber with a PVC lid and an anti-slip ribbed surface.

Installation is fast and simple. Each channel measures 1.5" wide x 1.25" high - large enough to hold SMPTE cables, audio snakes and communication w

Clean up important wiring jobs. Slotted wall duct features break-away fingers which provide additional access for wire leads.

Slotted wall duct is manufactured with two score lines.
The first score line is at the base of the finger, allowing the finger to be bent and broken away when a greater opening is required. The second score line is lower allowing a section of the sidewall to be easily removed by cutting the sidewall down to the lower score line. Use HellermannTyton's TDNT notching tool and

Clean up important wiring jobs. Slotted wall duct features break-away fingers which provide additional access for wire leads.

Slotted wall duct is manufactured with two score lines.
The first score line is at the base of the finger, allowing the finger to be bent and broken away when a greater opening is required. The second score line is lower allowing a section of the sidewall to be easily removed by cutting the sidewall down to the lower score line. Use HellermannTyton's TDNT notching tool and

HellermannTyton's low voltage TSR surface raceway system is a one piece latching duct designed to contain, route and protect wire and cable when it is not feasible to run it within the wall. It is manufactured from a 94 V-0 PVC and features a superior adhesive which conforms to most any surface. Designed with a flexible hinge, the raceway allows numerous openings without creating discoloration or stress cracking. The self-locking, hidden positive latch allows for quick re-entry as well as secure

• Our surface raceway systems are industry preferred for their sleek designs, labor savings features, and durability
• Tamper resistant, the cover's self-locking, hidden positive latch permits quick re-entry as well as providing a secure installation of premise wire
• Manufactured from UL 94V-0 rated PVC material
• Fittings incorporate a minimum 1" bendradius per TIA/EIA 568-B and 569-A standards
• Rubber-based foam tape adhesive with high ultimate bond strength conforms to any surface
• Flexible hinge allows th

Cover for TYT-2X2-BK completes the professional look of your wiring jobs. Slotted wall duct features restricted opening to prevent unintended removal of wires & permits any individual wire to be traced without disconnection. Offers the best of a harness, yet permits quick routing & re-routing. Black.

Please note: These items ship out at an Oversize Rate.

HellermannTyton's low voltage TSR surface raceway system is a one piece latching duct designed to contain, route and protect wire and cable when it is not feasible to run it within the wall. It is manufactured from a 94 V-0 PVC and features a superior adhesive

• Length: 8 ft . Width:1.75 " Height: 1 "

• Our surface raceway systems are industry preferred for their sleek designs, labor savings features, and durability
• Tamper resistant, the cover's self-locking, hidden positive latch permits quick re-entry as well as providing a secure installation of premise wire
• Manufactured from UL 94V-0 rated PVC material
• Fittings incorporate a minimum 1" bendradius per TIA/EIA 568-B and 569-A standards
• Rubber-based foam tape adhesive with high ultimate bond strength conforms to any surface
• Flexible hinge allows th

6 foot Cover for TYT-2X2 completes the professional look of your wiring jobs. Slotted wall duct features restricted opening to prevent unintended removal of wires & permits any individual wire to be traced without disconnection. Offers the best of a harness, yet permits quick routing & re-routing. Gray.

Please note: These items ship out at an Oversize Rate.

H3X3LG6 Slotted Wiring Duct Rectangular Polyvinyl Chloride Light Gray. Priced per foot but only sold in 6 foot increments.

• Material: Lead-Free PVC
• Color: Light Gray
• Type: Base
• Nominal Duct Size W x H (In.): 3.0 x 3.0
• Height (In.): 3.06
• Width (In.): 1 Length (ft.): 6.0
• Slot Width (In.): 0.31
• Cover Part Number: HC3LG6
• CE Compliant: Yes
• CSA Certified: Yes
• UL Recognized (File No. E147128): Yes
• UL recognized continuous use temp: 122°F
• Diameter (mm): 12.7
• RoHS Compliancy Status: Compliant

HellermannTyton's low voltage raceway (TSR) is a one piece, non-metallic, adhesive backed, latching raceway designed to aesthetically organize and route communications wires, including high speed UTP cable and fiber optic cable, from the telecom room to the work area.

• Tamper resistant, self-locking hidden positive latch permits quick re-entry as well as providing a secure installation of premise wire.
• Fittings incorporate a minimum 1" bend radius per ANSI/TIA-568-C and 569-A standards.
• Rubber-bas

FastLane Drop Over Protectors are made from durable polyurethane and feature heavy duty "L" shape connectors for easily attaching additional protectors as required. Patented 5-bar tread plate surface provides maximum traction for pedestrian traffic. These low profile protectors are compact for easy setup, disassembly, and storage. Optional Anti-Slip Rubber Pad Kit and/or Optional Carpet Kit with VELCRO Brand Fasteners also available for added traction.

Protects cables and cords with an outside di

Slotted wall duct features break-away fingers which provide additional access for wire leads. Slotted wall duct is manufactured with two score lines. The first score line is at the base of the finger, allowing the finger to be bent and broken away when a greater opening is required. The second score line is lower allowing a section of the sidewall to be easily removed by cutting the sidewall down to the lower score line. Use HellermannTyton's TDNT notching tool and snap out the desired section.

Powerback RFD5 Rubber Duct Protectors are ideal for lightweight vehicles, carts and pedestrian traffic in public, commercial and industrial areas. These three channel protectors are designed for multiple cable applications in walkways or work areas. They are non-metallic, flexible rubber protectors that allow you to organize portable cords and cables while reducing trip hazards. Protector is supplied unslit but can easily be slit on the bottom if necessary to accommodate a power plug.

• Protects v

HellermannTyton's low voltage TSR surface raceway system is a one piece latching duct designed to contain, route and protect wire and cable when it is not feasible to run it within the wall. It is manufactured from a 94 V-0 PVC and features a superior adhesive which conforms to most any surface. Designed with a flexible hinge, the raceway allows numerous openings without creating discoloration or stress cracking. The self-locking, hidden positive latch allows for quick re-entry as well as secure

Cover for TYT-3X3 completes the professional look of your wiring jobs. Slotted wall duct features restricted opening to prevent unintended removal of wires & permits any individual wire to be traced without disconnection. Offers the best of a harness, yet permits quick routing & re-routing. BLACK.
3 Inch Width. 6 Ft. Length.

Please note: These items ship out at an Oversize Rate.

• A temporary film is applied to the covers to protect against scratches and is writable for identification during
• installat

The Raceway System is Designed to Give You an Extra HAND
Wire Hider Non-Metallic Surface Mount Raceway was designed with the Installation Professional in mind.

Have you ever laid cable into a raceway only to have it fall out as you attempt to close the cover, especially on ceiling runs?

Wire Hider was designed to eliminate this problem and speed up installation - which saves you TIME and MONEY!

LABOR SAVING
Flexible vinyl flaps on base channel "traps" wire, making installation a one person job.

• Solid

• Our surface raceway systems are industry preferred for their sleek designs, labor savings features, and durability
• Tamper resistant, the cover's self-locking, hidden positive latch permits quick re-entry as well as providing a secure installation of premise wire
• Manufactured from UL 94V-0 rated PVC material
• Fittings incorporate a minimum 1" bendradius per TIA/EIA 568-B and 569-A standards
• Rubber-based foam tape adhesive with high ultimate bond strength conforms to any surface
• Flexible hinge allows th

HellermannTyton's low voltage TSR surface raceway system is a one piece latching duct designed to contain, route and protect wire and cable when it is not feasible to run it within the wall. It is manufactured from a 94 V-0 PVC and features a superior adhesive which conforms to most any surface. Designed with a flexible hinge, the raceway allows numerous openings without creating discoloration or stress cracking. The self-locking, hidden positive latch allows for quick re-entry as well as secure

HellermannTyton's low voltage TSR surface raceway system is a one piece latching duct designed to contain, route and protect wire and cable when it is not feasible to run it within the wall. It is manufactured from a 94 V-0 PVC and features a superior adhesive which conforms to most any surface. Designed with a flexible hinge, the raceway allows numerous openings without creating discoloration or stress cracking. The self-locking, hidden positive latch allows for quick re-entry as well as secure

• Our surface raceway systems are industry preferred for their sleek designs, labor savings features, and durability
• Tamper resistant, the cover's self-locking, hidden positive latch permits quick re-entry as well as providing a secure installation of premise wire
• Manufactured from UL 94V-0 rated PVC material
• Fittings incorporate a minimum 1" bendradius per TIA/EIA 568-B and 569-A standards
• Rubber-based foam tape adhesive with high ultimate bond strength conforms to any surface
• Flexible hinge allows th

• Our surface raceway systems are industry preferred for their sleek designs, labor savings features, and durability
• Tamper resistant, the cover's self-locking, hidden positive latch permits quick re-entry as well as providing a secure installation of premise wire
• Manufactured from UL 94V-0 rated PVC material
• Fittings incorporate a minimum 1" bendradius per TIA/EIA 568-B and 569-A standards
• Rubber-based foam tape adhesive with high ultimate bond strength conforms to any surface
• Flexible hinge allows th

HellermannTyton's low voltage TSR surface raceway system is a one piece latching duct designed to contain, route and protect wire and cable when it is not feasible to run it within the wall. It is manufactured from a 94 V-0 PVC and features a superior adhesive which conforms to most any surface. Designed with a flexible hinge, the raceway allows numerous openings without creating discoloration or stress cracking. The self-locking, hidden positive latch allows for quick re-entry as well as secure

• Our surface raceway systems are industry preferred for their sleek designs, labor savings features, and durability
• Tamper resistant, the cover's self-locking, hidden positive latch permits quick re-entry as well as providing a secure installation of premise wire
• Manufactured from UL 94V-0 rated PVC material
• Fittings incorporate a minimum 1" bendradius per TIA/EIA 568-B and 569-A standards
• Rubber-based foam tape adhesive with high ultimate bond strength conforms to any surface
• Flexible hinge allows th