Showing:

The chassis connector acts as a "feed-through" allowing simplified installations by connecting four conventional LCs on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode.

• Rugged 4-channel Point-to-Point multichannel routing solution
• Laser protected metal shutter seals dust proof with two-component rubber gaske

• Suggested OEM equipment connector due to LC front compatibility
• Designed as feedthrough with automatic sealing shutter
• Shutter with silicone gasket protects optical connection from dust and dirt
• Accommodates standard LC connectors on the rear for simple installation
• Connection on the front side either by rugged opticalCON or standard LC connector
• The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
• Water resistant according to IP65

Chassis connector with Ruthenium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP 65, front panel mount

The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Color

Water resistant opticalCON DUO LC-Duplex coupler (adapter) for cable extensions. 4 copper wires (0.75 mm²). Multi-mode PC. Black.

Rugged sealing cover for opticalCON chassis connectors

Fiber applications as drop down or stage boxes and certain outdoor devices require an additional protection of the opticalCON chassis connectors. The sealing dust cover encloses the entire shutter group and completely protects the interior from pollutant and ingress of water. It can be mated with the cable connector cover to keep the interior clean.

The dummyPLUG NDO for Neutrik opticalCON receptacles enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

The pulling sock which is available as single and split version simplifies the installation at a pulling force > 100 kg. The ADVANCED pulling solution offers an optimal protection for the cable connectors in harsh environment.

Weatherproof opticalCON MTP coupler (adapter) for cable extensions.

Weatherproof opticalCON MTP coupler (adapter) for cable extensions.

Water resistant opticalCON DUO LC-Duplex coupler (adapter) for cable extensions. 4 copper wires (0.75 mm²). Singlemode PC. Blue.

Weatherproof opticalCON DUO coupler (adapter) LC-Duplex for cable extensions with 4 copper wires (0.75 mm²).

Singlemode APC Green.

Water resistant opticalCON QUAD coupler (adapter) for cable extensions. Multi-mode PC. Black.

Water resistant opticalCON QUAD coupler (adapter) for cable extensions. Singlemode APC. Green.

Water resistant opticalCON QUAD coupler (adapter) for cable extensions. Singlemode PC. Blue.

Rubber coated pollutant-protection cover for opticalCON cable connectors including front housing. Due to the innovative design, the ergonomic rubber boot can be safely locked with the spring loaded push/pull mechanism of the cable connector front and protects the fiber ferrules of any contamination especially during spooling of cables.

It can be mated with the chassis cover to keep the interior clean.