Showing:

• Decodes 8VSB QAM 64 and 256 (Annex B) digital RF signals in frequency Range 54 to 860 MHz
• ATSC A.54 Compliant
• Supports EIA-608 closed caption
• High density design with 4 independent decoders and micro-controller in 1RU chassis
• Front panel status LED indicates 8VSB/QAM status and RF input signal lock
• Easy set-up and configuration via front panel LCD display
• Decodes any of the 18 ATSC video formats
• Supports HRC and IRC offset formats
• Features 4 F-connector video outputs, 8 left and right stereo audio outpu

The PFAD-900cs is a high quality cable television audio/video demodulator utilizing microprocessor controlled tuning. The unit demodulates VHF, UHF and cable channels from 54 MHz to 806 MHz. IRC and HRC offsets can be activated by push button switches located in the front panel. The PFAD-900cs incorporates a phase locked loop synthesized L.O. in conjunction with a non-volatile microprocessor for precise frequency selection. The unit accepts any NTSC television signal in the 54 MHz to 806 MHz fre

Accepts one 8VSB (digital off-air) or QAM 64/256 Input (digital cable) and delivers one output in NTSC composite video with analog stereo audio. It allows delivering of a digital off-air program to viewers with an analog TV set. It also allows an operator to cherry-pick channels from a "clear" QAM cable lineup.

AQD-PLUS is the same as AQD, but includes the AFD broadcast package. AFD (Active Format Description) is a standard set of codes embedded in the video stream and used by digital television

AQD (ATSC/QAM Demodulator) accepts one input in 8VSB (digital off-air) or QAM (digital cable) format, and delivers one output in NTSC composite analog Audio/Video format, and two identical outputs in ASI format. AQD allows delivering of a digital off-air program to viewers with an analog TV set. It also allows an operator to cherry-pick channels from a "clear" QAM cable lineup. AQD PLUS is the same as AQD, but includes the AFD broadcast package. AFD (Active Format Description) is a standard set

The DHDP Series is a two-unit system consisting of a Downconverter unit which acts as the input section and an Upconverter unit which acts as the output section. Both units are housed in a single MICM style die-cast chassis. The Downconverter unit is designed to accept any 8VSB signal from 54-860 MHz. Channel entry is made using a 2 digit front panel accessible BCD switch. (I.E. - VHF 2-13, UHF 14-69 & unused spectrum 806-860 MHz). The Downconverter outputs an IF signal which is fed to the Upcon

8VSB or QAM Input, Baseband Audio/Video Output. The MDDM-860 is a digital demodulator and decoder that receives one input in ATSC 8VSB (digital off-air) or "clear" QAM (digital cable) format and delivers one NTSC composite analog video and stereo audio output. The unit allows delivering of a digital off-air program to viewers with an analog TV set. It also allows operators to cherry-pick channels from a clear QAM cable lineup. Headends processing analog broadcasts using Blonder Tongue's MIDM dem

The unit accepts any NTSC television signal in the 5.75-806 MHz frequency range, converting it to baseband video and audio while maintaining over 60 dB S/N ratio.

• Broadcast quality specifications for unparalleled picture quality
• Keyed AGC system provides excellent picture stability
• Quadrature single-tuned audio detection guarantees superior audio quality
• Digital display provides quick channel identification
• 45.75 MHz composite IF output allows tuner monitoring, encoder, ghost canceling and video over

A high performance & reliability headend equipment package. Up to twelve model MPCMA modulators, plus power supply, can be combined in a single 2RU package. The MPCD demodulator is also available for use in this system and occupies two rack spaces. Each MPC-12 system is custom assembled with your required modules and is balanced and tested at Pico Macom for easy installation. High quality components and RF level controls assure years of reliable operation. The modulator is shipped with all inter