Artel FiberLink 4040-B9S 4 Channel Analog Audio Line Level 1550nm Singlemode 1 Fiber Transmitter Box Version

ITEM #: ARTL-4040-B9S MFG #: 4040-B9S

Primary Image
  • Product Image Thumbnail 1 of 3
  • Product Image Thumbnail 2 of 3
  • Product Image Thumbnail 3 of 3
Free Shipping with $49 Minimum Order

List Price:

$2,172.50

Our Price:

$1,890.00

Availability: Typically Ships in 3-10 Business Days
iAvailability Description Popup


    4040-B9S - Overview

    The Fiberlink 4040 Series digitally transmits four independent audio channels over one multimode or single mode fiber at 850, 1310 or 1550 nm. It is ideal for rental, staging, education and broadcast applications. The 4040 is the 1550 nm Singlemode Box Transmitter for the 4040 system.The FiberLink 4040 Series transmission systems are normally preset for immediate use with audio input circuitry set for balanced 600 Ohm input impedance and output set forbalanced audio. If a different protocol is desired, it can be easily selected using the flip switches located on the back panel of the unit. (See Audio Switch Setting.) There are indicator LEDs on the units for monitoring purposes and several user selectable options for configuring audio inputs and outputs. The FiberLink 4040 series optical transmission system is a configurable, adjustment-free transmitter/receiver pair that employs digital processing and transmission techniques to convey up to four 1-way channels of audio.The use of digital encoding assures high-quality noise-free transmissions that retain all of their initial parameters regardless of fiber optic cable attenuation. In addition, integral LED indicators are provided on each unit to continuously signify the presence of audio signals and, thus, the proper operation of each side of the system.

    • Features:

      • No adjustments; pure digital processing and transmission
      • 24 bit/96 kHz sampling; maximum audio level +24 dBu 20 Hz to 20 kHz frequency response
      • Line level, balanced or unbalanced audio operation Indicator
      • LEDs monitor audio signals and power
      • Wide range power supply allows operation from low voltage AC and DC sources
      • Card version fills one slot in 6000A card cage
      • System consists of transmitter and receiver unit; card or box version. Each end, plus power supply, must be purchased separately
      • RoHS Compliant
       
    • Specifications:

      • General
      • LED Indicators: Power; Audio Present (per channel); Alarm LED (card version only)
      • Power Requirements: 9-24 volts AC or DC, 5 watts
      • Operating Temperature Range: -35° to +60° C
      • Relative Humidity: 10%-90% (non-condensing)
      • Optical Connectors: ST
      • Operating Wavelength: 850, 1310 or 1550 nm
      • Dimensions (W x H x L): 6.5 x 1.15 x 8 (inches)
      • Weight: 1 lb.
      • MTBF: 83,000 Hours

        Audio
      • Number of Audio Channels: 4, balanced or unbalanced
      • Frequency Response: +0/-0.5 dB, 20 Hz - 20 kHz
      • Bits-per-Sample/Sampling Rate: 24 bits; 96 kHz
      • Maximum Audio Level: +24 dBu
      • SNR (A-Weighted): 95 dB
      • THD+N: 0.002%, 20 Hz - 20 kHz
      • Channel Phase Differential: +0.1°
      • System Latency: 200 us + fiber cable propagation delay (typically 5 us/km of fiber)
      • Crosstalk: Min. 95 dB (1 kHz)
      • Input Impedance: 600 Ohms terminated; >24 k Ohms unterminated
      • Output Impedance: 50 Ohms
      • Audio Connectors: Removable screw terminal
      • Switches: Dip switches to select input termination, balanced or unbalanced input/output. Selectable on a per-channel basis
       

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov