Attero Tech unAX2IOplus 4x2 Ch 2 Gang US Wall Plate 2 Mic/Line In x2 Out (XLR) - Phoenix I/O - PoE - AES67

ITEM #: ATEC-UNAX2IOPLUS MFG #: UNAX2IO+

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the ATEC-UNAX2IOPLUS

UNAX2IO+ - Overview

The Attero Tech unAX2IO+ AES67 audio interface is a cost effective multi-IO wall plate. The unAX2IO+ features two balanced mic/line XLR inputs, two balanced XLR line outputs, and a further two balanced line inputs on de-pluggable connectors on the side of the unit. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unAX2IO+ is PoE enabled, so all connectivity (power, control and data) is provided by a single CAT-5e/6 cable. The unAX2IO+'s size and I/O density make it easy to put audio connectivity wherever it's needed.

  • Features:

    • 2 Mic/Line balanced analog inputs supporting 0dB, +15dB, +25dB and +40dB gain
    • 2 front pane XLR line level balanced analog outputs
    • 2 separate line level balanced inputs on the side of the unit
    • Input gain and +48V phantom power controllable via software over the network
    • Powered by IEEE 802.3af PoE
    • Black and white inserts and Decora plates included
     
  • Specifications:

      Analog Audio Inputs
    • Input Type Balanced and RF filtered 3-pin XLR-F (Front)
    • Input Impedance >1.8 kΩ @ any input gain
    • Maximum Input Levels
    • +20 dBu, -15 dB Pad Active
      +5 dBu, 0dB Pad Inactive
      -22 dBu, +25 dB Gain
      -38 dBu, +40 dB Gain
    • THD+N: < 0.05 % @ any input gain (20 -22 kHz)
    • EIN: -115 dB (20 -22 kHz)
    • Dynamic Range: > 95 dB (20 -22 kHz)
    • Frequency Response 20-20kHz, +/- 0.5dB

      Analog Audio Output
    • Output Type Balanced output on 3-pin Terminal Block (Side)
    • Maximum output level +20 dBu , with SW volume control
    • THD+N < 0.05 % (20 -22 kHz)

      AES67 Network
    • Physical Layer: Ethernet
    • Connector (s): RJ-45
    • Cable Quality: CAT-5e or better, UTP
    • Transmission Speed: 100 Mbps
    • Supported Sample Rates: 48kHz
    • Minimum Audio Latency: 1ms
    • AES67 Support: AES67, SAP based stream discovery

      Power Specifications
    • PoE Power 802.3af Class 0
    • Power Consumption: < 5W Max

      Physical Dimensions
    • Width: 3.54"
    • Height: 4.2"
    • Depth: 2"
    • Weight: 0.6 lbs.

      Regulatory Compliance
    • Certifications FCC CFR 47 Parts 15B Class B, ICES-003
    • CE (EN55032 / EN55034), RoHS, REACH

      Environmental Operating Specifications
    • Operating Temperature 0 to 40°C
     
  • Warranty:

    • 5 Year
     

UNAX2IO+ - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov