Attero Tech UND3IO-B-C 2x2 Ch 2 Gang US Wall Plate XLR In & Out - RCA - 3.5mm I/O - PoE - Black - Symetrix control

ITEM #: ATEC-UND3IO-B-C MFG #: UND3IO-B-C

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the ATEC-UND3IO-B-C

UND3IO-B-C - Overview

The Attero Tech unD3IO Dante™ Audio Interface is a cost-effective multi-IO wall box. The unD3IO features a balanced mic/line XLR input and a balanced XLR line output. Two RCA line level inputs and a 3.5mm TRS line level input complete the available inputs. A 3.5mm TRS line level output is also included. The unD3IO is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT-5 cable. The unD3IO's size and I/O density make it easy to put Dante™ connectivity wherever it's needed - near the audio source or sink - thereby eliminating costly and interference prone analog wiring.

  • Features:

    • 1 Mic/Line balanced analog input supporting 0dB, +25dB, and +40dB gain
    • 1 line level balanced analog output
    • 2 RCA (summed to mono) and 1 stereo 3.5mm (summed to mono) inputs
    • 1 3.5mm stereo output
    • Input gain, output gain, and +48V phantom power controllable via software over the network
    • Powered by IEEE 802.3af PoE
     

  • Specifications:

      Audio Inputs (XLR)
    • Input Type: Balanced and RF filtered 3-pin depluggable
    • Gain: 0dB, +25dB, +40dB, software selectable
    • Maximum Input Levels
      • +12dBu @ 0dB gain
      -13dBu @ +25dB gain
      -28dBu @ +40dB gain
    • Phantom Power: +48V, software selectable
    • Input Impedance: >1.8K ohms at any gain setting

      Audio Inputs (RCA, Jack)
    • Input Type: Unbalanced RF filtered line level stereo, each summed to mono

      Audio Outputs (XLR)
    • Output Type (XLR): Balanced line level with automatic muting on loss of Dante signal
    • Output Gain: 0dB
    • Maximum output level: +12dBu

      Audio Outputs (Jack)
    • Output Type (Jack): Unbalanced line level with automatic muting on loss of Dante signal
    • Maximum output level: +12dBu

      Audio Performance
    • Frequency Response: +/- 1dB, 20Hz - 20kHz EIN -115dBu (+40dB gain)
    • Noise: <-90dBu @ 0dB gain
    • System THD: <0.01% at any gain, input signal 3dB below maximum

      Dante Network
    • Physical Level: Standard Ethernet
    • Connector: Single RJ-45
    • Cable Quality: CAT-5
    • Transmission Speed: 100Mbps
    • Power Requirements IEEE802.3af PoE
    • Power Consumption Less than 3W
    • Dimensions 2.75"H x 3.60"W x 1.88"D
    • Operating Temperature: 0 OC - 40 OC
    • Compliance FCC CFR 47 Parts 15B, ICES-003, CE (EN55022), RoHS
     

  • Warranty:

    • 5 Year
     

Required Accessories

UND3IO-B-C - Required Accessories

    Recommended Accessories

    Similar Products

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov