Clear-Com PG4-INTERCOM-CC-FX ProGrid 4-Port Digital Intercom Audio and Data Control I/O Interface Device with FX Module

ITEM #: CLCM-PG4INTCCCFX MFG #: PG4-INTERCOM-CC-FX

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the CLCM-PG4INTCCCFX

PG4-INTERCOM-CC-FX - Overview

All PG-INTERCOM devices allow seamless integration of intercom audio and control data from Clear-Com and RTS/Telex intercom panels, interfaces and matrices. The PG-INTERCOM devices are available in two different hardware configurations, RS422 for Clear-Com and RS485 for RTS/Telex. The Clear-Com PG4-INTERCOM-CC-FX offers four wire matrix ports with serial control 4 four wire Clear-Com matrix ports with line level and RS422 serial inputs and outputs for Clear-Com key panels, matrices and interfaces. The FX Optocore Fiber Network Module allows the converter to be used as a part of a 24 device ProGrid system.

Network
Redundant fiber connections can be established using the two provided Optocore Optical LINK interfaces. All PG-INTERCOM devices are equipped with either single-mode or multi-mode SFP fiber transceivers. Depending on the selected transceivers, distances from 2300ft (700m) up to 43.5mi (70km) can be covered. The dual redundant ring structure provides maximum safety in a network with low latency. Four RS485 ports allow the transport of a wide range of serial data standards, such as RS422, DMX and MIDI. In addition to the audio signals, video and data signals are transmitted by the fiber connection.

SANE
Each PG-INTERCOM panel is equipped with two SANE ports, which enables send and receive of up to 56/64 audio channels via standard CAT5 cable. Use the SANE ports to expand the number of inputs and outputs on ProGrid FX devices. SANE ports can also be used to send Ethernet data. In addition, PG-INTERCOM devices have two separate LAN ports for 100BaseT Ethernet transmission.

Word Clock
All ProGrid devices are equipped with a Word Clock IN and OUT to enable the synchronization of the devices to an external source and are used to pass on the Word Clock from one device to the next.

ProGrid Configuration Software
The ProGrid Configuration Application Software provides easy access to all configuration and control tools, including routing, naming, storage and recall of configurations on the computer, including an off and online mode with real-time level display.

  • Features:

    • 4-Port Digital Intercom Audio and Data Control I/O Interface Device
    • Interfaces with Clear-Com and RTS/Telex intercom panels, interfaces and matrices
    • Available in two hardware configurations: RS422 for Clear-Com and RS485 for RTS/Telex
    • Offers four RJ45 4-wire intercom ports
    • Dual power supplies with automatic switchover included
    • Features the Optocore™ Optical and SANE™ CAT5 Digital Network technologies
    • Duplicated 4-wire Intercom Port wiring with reversed I/O and Rx/Tx
    • 2 x 100 Mbit Ethernet ports
    • 4 x RS485 serial data connections
    • Word Clock input and output
    • 2 x optical LINK interface with duplex LC connectors
    • USB and RS232 ports for configuration and control
     
  • Specifications:

    • Intercom Ports
    • Convention: EIA / TIA - 422 or EIA / TIA - 485
    • Hardware Standard: IC422/IC485; FCC-RJ45

      Analog Line Input
    • Impedance: 10KOhms
    • Maximum Input Level: +18dBu
    • SNR: 115dB (A-weighted)
    • THD+N a -1dBFS: >100dB

      Analog Line Output
    • Impedance: 45Ohms
    • Maximum Output Level: +18dBu
    • SNR: 115dB (A-weighted)
    • THD+N @ -1dBFS: >98dB

      SANE, LAN ports
    • Audio: TIA - 568A/B; Optocore 200 Mbit/s
    • LAN: TIA - 568A/B; IEEE - 802.3; 10/100 Mbit/s

      Auxiliary Ports
    • Convention: EIA / TIA-485
    • Number of Data Channels: 4
    • Data Channel Type: Digital control data
    • Data Rate: Up to 10 Mbps

      Impedance
    • Termination: 330Ohm
    • Source: = 10Ohm

      Word Clock
    • Hardware standard: 75Ohm / BNC
    • Data Rate: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (Depending on used sample rate)
    • Impedance Input: 1k / 75Ohm software switch
    • Impedance Output: 75Ohm

      Optical Link
    • Input, Output, Dual: Full bandwidth
    • Connection: Duplex LC
    • Protocol: Optocore
    • Transmission: Full-duplex
    • Data Rate: 2 x 2Gbps
    • Optical Wave Guide Cable Lengths: Multi-mode fiber 50µm; = 700 m
    • Single-mode fiber 9µm; 10km (70 km on request)

      Power Supply
    • Number of Power Supplies: 2 (with function check and automatic switch-over)
    • Type: Switch-mode, universal input
    • Mains Voltage: 100 - 240VAC; 50 - 60Hz; 25VA-typ; 32VA-peak

    • Remote Control: RS232/Ethernet/USB Port: Interface to PC
    • Dimensions: 19.2 in W x 1.73 in H x 7.87 in D (483 mm x 44 mm x 200 mm)
    • Weight: 6.0 lbs (2.7 kg)
     
  • Item Includes:

    • 1x Clear-Com PG4-INTERCOM-CC-FX ProGrid 4-Port Digital Intercom Audio and Data Control I/O Interface Device with FX Module
     

PG4-INTERCOM-CC-FX - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov