Doug Fleenor Design DMX512DIM-ELV 12 Channel 100w Dimmer Pack

DMX12DIM-ELV - Overview

• Specifications:

  • Input circuit: Protected EIA-485 receiver (LT1785)
  • Input protection: Undamaged by up to 60 Volts continuous, 15KV transients
  • Input signal: 0.2 volts minimum, 12 volts maximum, DMX512, DMX512/1990, or DMX512-A
  • Input connector: Gold plated 5 pin male XLR (Neutrik D-1 series) 3 pin XLR optional
  • Input pass through: Gold plated 5 pin female XLR (Neutrik D-1 series). All five pins are passed through
  • Termination: None. Unused pass through connectors must be externally terminated
  • Power input: 120 VAC 60 Hz 10 Amps at full load. Actual current draw is 0.07A plus connected load
  • Power input connector: NEMA 5-15P (15A U-ground) on 18 inch 12 gauge pigtail
  • Idle power: 7 Watts
  • Power output: 120 VAC 60 Hz 0.83 Amps (100W) maximum per output
  • Minimum load: No minimum load requirement
  • Output protection: 1.5A internal fuse on each output channel
  • Output connectors: NEMA 5-15R (15A grounded parallel blade)
  • Dimming circuit: Digitally fired, opto-isolated, MOSFET power devices. These components allow for forward or reverse phase dimmer control
  • Rise/fall time: 2 uS (10% to 90% at 90 degree firing angle) at rated load
  • Dimming curve: Square law. Visually appealing on LED lamps (120V), halogen lamps, magnetic lowv oltage (MLV) and electronic low-voltage (ELV)
  • Non-dim curve: Each channel can be configured as a non-dim which turns on at 60%, off at 40%
  • Outputs switch on at zero crossing. Other non-dim trip point options include 50% and 1% (globally settable)
  • DMX footprint: Twelve consecutive DMX slots beginning with the selected DMX starting address
  • DMX starting address: Three digit front panel thumbwheel switch. Address changes are immediate (no power cycling required)
  • Local control: An "address switch" setting of 601 turns on output 1, 602 turns on output 2, etc. Setting; 699 turns on all outputs. Setting 698 turns on all outputs when DMX is present. Setting; 697 turns on all outputs if any DMX level is above zero.
  • Status indicators: Red POWER indicator; Green MIMIC 1 indicator mimics the intensity of output 1 (useful in troubleshooting); Green SIGNAL indicator illuminates when DMX512 is present; flashes when local control is active (address switch settings of 601 thru 624 and 697 thru 699).
  • Cooling: Processor controlled low speed fan exchanges internal air from front to side.
  • Isolation: DMX512 input is optically isolated from AC power circuits to 600 Volts.
  • Color: Silver hammer tone with black front and rear panels.
  • Safety listing: Pending ETL Listing to UL 508
  • Size(H x D x W): 1.7 in x 10.5 in 19 in (17 in behind rack ears)
  • Weight: 7 pounds
   

• Item Includes:

  • Rack ears
   

• Warranty:

  • 5 year