DPA d:fine 4266 Omni Flex Earset Mic with 90mm Boom MicroDot - Beige

ITEM #: DPA-4266OLFF00ME MFG #: 4266-OL-F-F00-ME

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the DPA-4266OLFF00ME

4266-OL-F-F00-ME - Overview

The DPA 4266-OL-F-F00-MEis a d:fine 4266 omni flex earset mic with a 90mm boom MicroDot termination in beige. The d:fine™ 4266 Omnidirectional Headset Microphone combines the legendary sound of the d:fine™ 4066 Omnidirectional Capsule with a lightweight and flexible headset system. This condenser mic is easy and fast to adjust and it offers clean and transparent sound quality with lots of headroom. The capsule itself is the same type as the d:fine™ 4066, but is attached to an interchangeable boom arm.

  • Features:

    • Pristine audio quality
    • Lightweight and flexible
    • Easy mounting to the left or right
    • Minimal visual impact
    • Resistant to humidity
    • Flexible adapter system fits most professional wireless systems
     

  • Specifications:

    • Directional pattern: Omnidirectional
    • Principle of operation: Pressure
    • Cartridge type: Pre-polarized condenser
    • Frequency range: 20 Hz - 20 kHz
    • Frequency range, ±2 dB: 20 Hz - 20 kHz with 3 dB soft boost at 8 - 15 kHz
    • Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
    • Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
    • Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
    • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)
    • Total harmonic distortion (THD): < 1% up to 123 dB SPL peak, < 1% up to 120 dB SPL RMS sine
    • Dynamic range: Typ. 97 dB
    • Max. SPL, peak before clipping: 144 dB
    • Output impedance From MicroDot: 30 - 40 Ω. From DAD6001-BC: 100 Ω
    • Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
    • Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
    • Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
    • Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems
    • Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
    • Connector: MicroDot
    • Color: Black or beige
    • Weight: Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cable: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz)
    • Microphone diameter: 5.4 mm (0.21 in)
    • Microphone length: Boom length: Normal: 120 mm (4.7 in), Medium: 100 mm (3.9 in)
    • Cable length: 1.3 m (4.3 ft)
    • Cable color: Black or beige
    • Cable diameter: 1.6 mm (0.06 in)
    • Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
    • Electromagnetic compatibility (EMC): Fully compatible
    • Temperature range: -40°C to 45°C (-40°F to 113°F)
    • Relative humidity (RH): Up to 90%
     

  • GTIN:

    5713055013059
     

Required Accessories

4266-OL-F-F00-ME - Required Accessories

    Recommended Accessories

    Similar Products

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov