EasySplicer MK2 Portable Automatic Fiber Fusion Splicer for Singlemode & Multimode with Built-in Oven

ITEM #: EASY-SPLICER MFG #: EASY-SPLICER

Primary Image
  • Product Image Thumbnail 1 of 5
  • Product Image Thumbnail 2 of 5
  • Product Image Thumbnail 3 of 5
  • Product Image Thumbnail 4 of 5
  • Product Image Thumbnail 5 of 5
Free Shipping with $49 Minimum Order

Our Price:

$2,195.00

Availability: Typically Ships in 3-10 Business Days
iAvailability Description Popup
  • Item restricted to the Contiguous United States ground shipment only.


EASY-SPLICER - Overview

The EasySplicer mk2 is a precision, Swedish made Fiber Optic Fusion Splicer, created for onsite installations. It's designed to be portable, rugged and allows you to solve fiber issues in the field.

EasySplicer mk2 differs a bit from other Fiber Optic Fusion Splicers, it's specifically made for the on the job installer and end-user. Many of the Splicers on the market are difficult to use and require a lot of education before they can be easily operated. EasySplicer mk2 is easy to learn, in most cases you're up and running within an hour.

EasySplicer mk2 functions are simple too, three buttons total and most functions only require the use of the main button for splicing. Still, the precision of the unit is extremely high. A typical splice only has a loss of 0,03 dB (Single mode). After splicing it pull tests the splice and makes a loss estimation and troubleshoots your work. Warnings are also provided before splicing (like; Bad fiber, Dirty fiber and offset).

The on board battery-pack, small yet powerful, allows you to perform some 60 splices before you need to recharge. Extra battery-packs are sold separately and are easily swapped out onsite.

EasySplicer mk2 constantly calibrates itself for environmental changes like moisture, air pressure and temperature. This can also be done manually, and calibration is performed within seconds to make sure the splice is perfect.

EasySplicer mk2 uses the V-grove method for splicing and is simple to service and maintain, it's easily one of the most inexpensive splicers on the market yet still boasts a performance rate 3-4 times beyond more expensive units!

  • Features:

    • Fiber Optic Fusion Splicing made easy and affordable with the EasySplicer mk2
    • For both Singlemode and Multimode fibers
    • Splicing time of less then 7 seconds
    • Low Loss estimation
    • Pull test of performed splices
    • Built in oven
    • Easy to use and to carry along
    • Perfect for the FTTH installer
     
  • Specifications:

    • Splicing method: V-groove (cladding alignment).
    • Fiber Types: SMF, MMF 50/125µm and 62.5/125µm fiber, 250µm primary and 900µm secondary coated fiber.
    • Fiber Handling: Fiber holders, 3 pairs (250, 900 and loose tube).
    • Splice Programs: 3 pre-defined. SMF, MMF, OM1.
    • Typical Splice Loss: 0.03dB SMF, 0.01dB MMF.
    • Altitude Compensation: Automatic up to 4100 meters altitude with compensation for moisture and temperature.
    • Typical Cycle Time: 7s + 35s (splice + oven cycle).
    • Sleeve Dimensions: Max 64mm length, 2-7mm diameter supported by oven.
    • Communication: USB, mini usb plug.
    • Memory Internal: 1MB, External SD-Card.
    • Display: LCD, color, 2.8 , 320x240 pixels.
    • Oven: Ceramic/teflon-type. 40mm sleeves in about 35 sec.
    • Magnification Camera: 140x.
    • Operating Environment: 0-45°C, max 95% RH, non-condensing.
    • Size: 230 x 98 x 53mm.
    • Weight: 800g.
    • Power Sources: External power supply, 6V, 1.5A, 100-240VAC 50-60Hz, Built in 3400mAh Li-Ion battery pack.
    • Splicing Capacity: 60 splice + oven cycles.
    • Additional Features: Loss estimation, Fiber fault detection, SD-card for logging etc.
     
  • Item Includes:

    • 1x Oven (Built in).
    • 1x 3 pairs of fiber holders, 250µm 900µm and loose tube.
    • 1x Cleaver with bin (trash can).
    • 1x Stripper.
    • 1x Rechargeable battery pack (Built in).
    • 1x Power supply
    • 1x Carrying case
     
  • Tags

    :

    • #Fiber Optic Fusion Splicer #Fiber Fusion Splicer
     

EASY-SPLICER - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov