Xantech ML95 Micro Link Universal IR Receiver

ITEM #: ML95 MFG #: ML95

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the ML95

ML95 - Overview

The Micro Link IR Receiver is a small peep-hole style infrared repeater assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the "IR RCVR" jack on the connecting block, such as the models 789-44, CB60, and 791-44. The Micro Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7-foot cable - as when installing the Micro Link IR Receiver in a cabinet where the controlled equipment is behind closed doors.

  • Features:

    • Small size; mounts in 1/2" diameter hole. 2 inches deep (50mm).
    • Quick-Connect 3.5mm Stereo Mini Plug on 7ft. cable for direct plug-into Xantech Connecting Blocks.
    • Works in normal 3-wire mode (12VDC, IR, GND).
    • Green Talkback LED for System Verification.
     
  • Specifications:

    • Infrared modulation frequency bandwidth: 25 - 60 kHz.
    • IR reception range: Up to 120 feet, depending on remote control output strength and ambient conditions.
    • Reception angle: 55 degrees off axis for 50% range reduction.
    • Cable requirements: 3-conductor. Use 24 gauge up to 200', 22 gauge up to 600' 20 gauge up to 2000', 18 gauge up to 5000' - unshielded
     
  • GTIN:

    0042777318803
     

ML95 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov