Muxlab 500753-TX HDMI / RS232 over IP Transmitter with PoE

ITEM #: MUX-500753-TX MFG #: 500753-TX

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the MUX-500753-TX

500753-TX - Overview

The HDMI / RS232 over IP Transmitter with PoE allows HDMI equipment to be connected up to 330 ft. (100m) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several encoders and decoders to the same Ethernet network.

For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet switch must have Gigabit ports, DHCP Server capability and IGMP communications protocol. We recommend using the Cisco SG300 Series Managed Switches.

A MuxLab Management Software is available to simplify the configuration and utilization of the 500753. The software can be downloaded from the MuxLab Web Site; http://muxlab.com/hdmi-over-ip-management-software.

Note: This device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (MUX-500992) may be purchased separately.

  • Features:

    • HDMI 1.3, PoE powered
    • Supports up to 1080p resolutions
    • Supports IR, and RS232 transmission
    • Motion JPEG compression with Very low latency
    • Transmission up to 120m (400ft) over Cat5e/6
    • Compatible VGA over IP with RS232
     
  • Item Includes:

    • Transmitter only
     
  • GTIN:

    0627699907535
     

500753-TX - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov