NTI ST-IPHD-POELC Low-Cost HDMI Over Gigabit IP Extender with IR and Power over Ethernet (PoE)

ST-IPHD-POELC - Overview

• Features:

  • Supports HDTV resolutions up to 1080p.
  • Ideal solution for digital signage applications.
  • Power over Ethernet (PoE) - power supply not required at the local or remote unit.
  • Broadcast real-time HDMI video and audio signals to multiple display locations with a managed or unmanaged (also known as non-managed) network switch.
  • Support for multiple transmitters requires a managed network switch with VLAN support. Standard LAN switches can only support one transmitter.
  • ransmits an HDMI signal over one CAT5e/6/7 cable.
  • Full Infrared Remote (IR) control of HDMI source from remote HDTV using existing source remote control.
  • Plug-and-Play installation allows receivers to find the transmitter automatically on the same subnet. (Network configuration may be required for managed network switch.)
  • Web interface for firmware updates.
  • Easily expandable. Add remote units as you add monitors.
  • Supports a maximum of 253 receivers.
   

• Specifications:

  • Local Unit
  • One female HDMI-A port for source connection.
  • One female 1000Mbps RJ45 port for sending high definition video/audio signals and DDC signal.
  • One female 3.5mm port for IR transmitter (included).
  • IR frequency range: 20 to 60 Khz.
  • Class 3 PoE compatible (10 watts maximum).
  • Supported input resolutions: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz.
  • Codec: H.264
  • Encoding delay: 22 mS at 30fps latency
    
    Remote Unit
  • One female HDMI-A port for HDTV display.
  • One female 1000Mbps RJ45 port for receiving high definition video/audio signals.
  • One female 3.5mm port for IR receiver (included).
  • IR frequency range: 20 to 60 Khz.
  • Class 3 PoE compatible (10 watts maximum).
  • Supported output resolutions: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz.
  • Supports embedded digital audio through HDMI compatible TVs or audio receivers.
    
    Power
  • Power over Ethernet: With a switch that supports Power over Ethernet, a power supply is not required at the local or remote unit.
  • Local and remote unit:
  • Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter (not included).
  • Country-specific AC adapter sold separately (PWR-SPLY-IPHDPOELC).
  • Output: 5VDC, 3.0A.
  • Power Consumption:
  • Local: 3.5W
  • Remote: 3.0W.
    
    Max Distance
  • 393 feet (120 meters) over Cat5e/6/7 cable.
    
    Cables
  • Use HD-xx-MM cable to connect an HDMI source or display up to 50 feet away (not included).
  • Use DVI-HD-xx-MM cable to connect a DVI source or display (not included).
  • Use CAT5e/6/7 straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
    
    Environmental
  • Operating temperature: 32 to 140°F (0 to 60°C).
    
    Dimensions
  • W x D x H (in): 4.13 x 3.72 x 0.94 (105 x 95 x 24 mm)
    
    Regulatory Approvals
  • CE, FCC, RoHS
    
    Warranty
  • Two years
   

• Warranty:

  • 2 Year