Netgear AV Line XSM4556-100NAS 48-Port 10/25G and 8-Port 40/50/100G Managed Ethernet Switch

ITEM #: NG-XSM4556 MFG #: XSM4556-100NAS

Primary Image
  • Product Image Thumbnail 1 of 4
  • Product Image Thumbnail 2 of 4
  • Product Image Thumbnail 3 of 4
  • Product Image Thumbnail 4 of 4
Free Shipping with $49 Minimum Order

List Price:

$24,756.14

Our Price:

$17,027.00

Availability: Typically Ships in 3-10 Business Days
iAvailability Description Popup


    XSM4556-100NAS - Overview

    The trend of moving matrix switching into the Ethernet network is inevitable and SDVoE already delivers capabilities far beyond that of a traditional matrix switch. Historically it has been simple to design AV over IP systems of up to 96 I/Os using a single switch using Layer-2 Multicast IGMP. However, larger installations required data center-class 100G Ethernet switches with more complex Layer-3 Multicast Routing techniques, adding complexity and cost to the Ethernet infrastructure. As SDVoE systems become ever larger, a new class of switches has come to market. The Netgear XSM4556-100NAS switch combines the configurability of a matrix switch with the power and scalability of Ethernet to support hundreds of AV over IP endpoints, at a price point dramatically cheaper than comparable matrix switches. Removing the need for Layer-3 PIM routing, these new switches offer IGMP Plus and greatly simplify system architectures with the same well-known IGMP techniques across the entire AV over IP network.

    • Features:

      • Key features
      • Cost effective 100G aggregation and 10G access layer for AV deployments and redundant spine & leaf topologies
      • Zero Touch AV over IP with pre-configured L2 Multicast on all models (10G AV encoders and decoders) and SDVoE-ready
      • Advanced Layer 3 feature set including IP Multinetting/CIDR, Static, PBR, VRRPv2, OSPFv3, PIM-SM, VxLAN, BGP4, VRF-Lite
      • Optimized for "Spine and Leaf" redundant AV installations, with or without MLAG between spine switches
      • Up to 320 TX / 320 RX (10 Gigabit) nodes all line rate with each other in a redundant spine and leaf architecture
      • 2 power supply units (APS750W) and 6 redundant fan trays (AFT402) pre-installed for 1+1 power and 4+2 fan redundancy
      • Ultra-low latency (spine 0.13æs @100G; leaf 0.119æs @10G) and scalable table size (32K MAC, 8K ARP, 4K VLANs, 32K routes)

        Software
      • Advanced classifier-based, time-based hardware implementation for L2 (MAC), L3 (IP) and L4 (UDP/TCP) security and prioritization
      • Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any Ethernet channeling
      • Up to 64 Link Aggregation Groups (LAG, Port-Channel, LACP) with 32 ports per LAG and Multi-chassis Link Aggregation (MLAG)
      • Comprehensive IPv4/IPv6 static and dynamic routing including IP Multinetting/CIDR, PBR, VRRPv2, OSPFv3, PIM-SM6, BGP4, VRF-Lite
      • Enhanced IPv4/IPv6 multicast forwarding with IGMPv3/MLDv2 and IGMP Plus enhancement at the VLAN level
      • IGMP Plus enhanced implementation for automatic multicast across a L2 network (igmp-plus easy macro-command)
      • High performance IPv4/IPv6 multicast routing with PIM-SM and PIM-SM6 associated with unicast static routes, or other L3 protocol
      • Advanced IPv4/IPv6 security including malicious code detection, DHCP Snooping, IP Source Guard, and Control Plane Policing (CoPP)
      • Priority-Based Flow Control (PFC), DCBX Bridging, Enhanced Transmission Selection (ETS) and VXLAN Gateway for server installations

        Availability
      • Two (2) redundant, modular power supplies are pre-installed contributing to business continuity management
      • Six (6) hot-swappable fan trays are pre-installed for 4+2 fan redundancy
      • Spine and leaf architecture with every leaf switch (10G/25G access) connecting to every spine switch (distributed 100G core)
      • Up to 48 paths ECMP routing for load balancing and redundancy
      • Link Dependency feature enables or disables ports based on the link state of different ports

        Management
      • Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow and RSPAN remote mirroring implementation
      • Service port for out-of-band 1 Gigabit Ethernet management (OOB)
      • Standard RS232 straight-through RJ45 for local management console (USB 2.0 to RS232 converter with PL203 chipset is advised)
      • Non-Disruptive Configuration for applying a new configuration file without disrupting the operation of unchanged features
      • Industry standard command line interface (CLI) only
       
    • Specifications:

      • Model Description: M4500 Managed Switch with 48x10G/25G SFP28 and 8x100G QSFP28 ports
      • Acoustics: 68.0dB @77°F - the noise is reduced when the two PSUs connect to a power source
      • Power Consumption (Max): 394 Watts
      • 25G SFP28 Ports: 48 SFP28 ports (1x10G default mode, other modes can be 1x25G and 1x10G)
      • 100G QSFP28 Ports: 8 QSFP28 ports (1x100G default mode, other modes can be 1x50G, 1x40G)
      • PSU and Fans: 2 modular Power Supply Units and 6 modular Fan Trays come pre-installed
      • Management: CLI only (local console, telnet port 1223 and SSH port 1234)
      • Management Ports
        1G Ethernet service port for out-of-band management (OOB, RJ45)
        RS232 straight-through serial RJ45 for local management console
      • Form Factor: Full width 1U (508mm depth) with two mounting ears (front) and rail kits (back)
       
    • GTIN:

      0606449145700
       

    XSM4556-100NAS - Required Accessories

      California Residents:
      WARNING:
      Cancer and Reproductive Harm - www.P65Warnings.ca.gov