Samson DA40 Antenna Distribution Amplifier for Concert 99 470MHz TO 1GHz

ITEM #: SAM-DA40 MFG #: SWDA40

Primary Image
  • Product Image Thumbnail 1 of 5
  • Product Image Thumbnail 2 of 5
  • Product Image Thumbnail 3 of 5
  • Product Image Thumbnail 4 of 5
  • Product Image Thumbnail 5 of 5

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the SAM-DA40

SWDA40 - Overview

The DA40 is an active antenna distribution system that allows multiple wireless microphone receivers to share a single pair of antennas. The half-rack, wideband UHF (400MHz-1GHz) system also provides RF gain to compensate for insertion loss. The DA40 works with a maximum of four wireless systems that utilize BNC-type connectors, including Samson's Concert 99 and Synth 7 systems.

The DA40 has four DC barrel power output connectors for powering wireless receivers, and comes with four DC power cables (with male to male barrel adapters). Receiver antenna connections are to be wired to the DA40's rear panel BNC jacks, and the appropriate tuned antennas to its front panel BNC jacks. Alternatively, you can use remote antennas, like the Samson PA1 Active Unidirectional Antennas, using up 100' of coaxial cable (RG-6 coaxial cable is recommended) to extend the operating range of wireless systems. The DA40 also includes rackmount hardware and an external power supply.

  • Features:

    • Half-rack, wideband UHF antenna distribution system
    • Recommended for use with Samson Concert 99 and Synth 7 wireless systems, and PA1 Active Unidirectional Antennas (all sold separately)
    • Handles up to four wireless receivers simultaneously
    • Four DC power outputs for powering receivers (four cables included)
    • Front and rear panel BNC antenna connectors (four cables included)
    • DC outputs for antenna bias
    • Rackmount hardware and power supply included
     
  • Specifications:

    • Frequency Range: 400MHz-1GHz (-3dB)
    • Gain (input to any output power): 0±1dB
    • IP3 Output Intercept Point: 50dBm (min), 20dBm (typical)
    • Impedance: 50Ω
    • Working Voltage: 15V DC, 2000mA
    • Current Consumption: 200mA
    • Power to Antenna: 12V, 500mA
    • Product Dimensions: 1.75" x 8.5" x 6" (42mm x 215mm x 150mm)
    • Product Weight: 2.25lb (1kg)
     
  • GTIN:

    0809164220084
     

SWDA40 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov