Studio Technologies Model 5482 Dante IP Intercom Audio Bridge

M5482-D64-D64 - Overview

• Features:

  • Dante audio-over-Ethernet technology with AES67 support
  • Interconnects two LANs with up to 64 channels in each direction
  • 44.1, 48, 88.2, and 96 kHz sample rate support
  • Integrated Sample-Rate-Conversion (SRC) capability
  • Multiple Gigabit Ethernet interfaces allow Switched or Redundant Dante operation
  • AC mains and DC powering
  • Multiple status LEDs and graphics display
  • Lightweight enclosure, single rack-space (1U) mounting
   

• Specifications:

  • Network Audio Technology (each Network Interface)
  • Type: Dante audio-over-Ethernet
  • AES67-2018 Support: yes
  • Dante Domain Manager (DDM) Support: yes
  • Ethernet Interface Configuration: switched or redundant
  • Sample Rates: 44.1, 48, 88.2, or 96 kHz
  • Pull-Up/Down Support: yes
  • Bit Depth: up to 24 bits
  • Number of Transmitter (Output) Channels: 64 (44.1 and 48 kHz sample rates), 32 (88.2 or 96 kHz sample rates)
  • Number of Receiver (Input) Channels: 64 (44.1 and 48 kHz sample rates), 32 (88.2 or 96 kHz sample rates)
  • Dante Audio Flows: 32 transmitter, 32 receiver
    
    Network Interfaces: 2
  • Physical Ethernet Connections per Interface: 3; Dante Primary, Dante Secondary, and Management
  • Ethernet Connection Type: 1000BASE-T (Gigabit Ethernet ("GigE")) per IEEE 802.3ab (10 and 100 Mb/s not supported)
  • Ethernet Connection NIC Status LEDs: one link and one activity for each Ethernet connection
    
    Audio Performance
  • Type: fully-digital paths between network interfaces (by way of sample-rate-converter (SRC) functions)
  • Dynamic Range: 147 dB at 48 kHz sample rate, 148 at 96 kHz sample rate, A-weighted
  • Distortion (THD+N): -140 dB at 48 kHz sample rate, -143 dB at 96 kHz sample rate, measured at -1 dBFS, 1 kHz
  • Internal Digital Audio Processing: 32 bits
  • Input-to-Output Audio Processing Latency: <500 uSec
    
    Front-Panel LEDs: 12, dual-color
  • Functions: provides indication of condition of incoming AC and DC power, Dante status on each interface, and Ethernet status
  • on each interface
    
    Back-Panel LEDs: 14
  • Functions: provides status indication of both firmware update functions and six Ethernet interfaces
    
    Power Sources
  • AC Mains: 100 to 240 V, 50/60 Hz, 8 W maximum
  • DC: 10 to 18 V, 0.6 A max
    
    Connectors
  • Ethernet: 6, RJ45
  • AC Mains Input: 3-blade, IEC 320 C14-compatible (mates with IEC 320 C13)
  • DC Input: 4-pin male XLR (pin 1 negative, pin 4 positive)
  • USB: 2, type A receptacle (used only for updating firmware)
    
    Environmental
  • Operating Temperature: 0 to 50 degrees C (32 to 122 degrees F)
  • Storage Temperature: -40 to 70 degrees C (-40 to 158 degrees F)
  • Humidity: 5 to 95%, non-condensing
  • Altitude: not characterized
    
    Dimensions
  • 19.0 inches wide (48.3 cm)
  • 1.72 inches high (4.4 cm)
  • 8.0 inches deep (20.3 cm)
  • Mounting: one space (1U) in a standard 19-inch rack
  • Weight: 3.2 pounds (1.4 kg)