Attero Tech unAIO2x2plus 2x2 Channel AES67 Mic/Line I/O Interface - PoE or 24VDC - AES67

ITEM #: UNAIO2X2PLUS MFG #: UNAIO2X2+

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the UNAIO2X2PLUS

UNAIO2X2+ - Overview

The Attero Tech unAIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of analog audio to any AES67-based networked audio system.The unAIO2x2+'s small form factor and PoE power capability make it easy to put AES67 connectivity where it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring. The unAIO2x2+ includes several features such as true +48V phantom power, maximum input and out levels of +20dBu, several input gain settings, and full output level control.

  • Features:

    • 2 Mic/Line balanced analog inputs supporting -12 dB (pad active), 0dB, +15dB, +30dB and +45 dB gain (software selectable)
    • 2 line level balanced analog outputs (0dB to -60dB plus mute software selectable)
    • Input gain, output gain, and +48V phantom power controllable via software over the network
    • Powered by either IEEE 802.3af PoE or +24VDC from an external supply
    • Small form factor, can be unobtrusively located near analog sources or sinks
    • Dual power (DC or PoE) means the unAIO2x2+ will work in systems with either standard or PoE Ethernet switches
    • +48V phantom power per channel
    • Built-in tone generator for audio system diagnostics
    • AES67 is compatible with all QSC Core DSPs
     
  • Specifications:

      Audio Inputs
    • Input Type: Balanced and RF filtered 3-pin depluggable
    • Gain: -12 dB Input Pad; 0dB, +15dB, +30dB, +45 dB software selectable
    • Input Impedance: >1.8K ohms at any gain setting
    • Maximum Input Levels
    • +20dBu @ 0dB gain (with pad active)
      +8dBu @ 0dB
      -7dBu @ +15dB gain
      -22dBu @ +30dB gain
      -37dBu @ +45dB gain
    • Phantom Power: +48V, software selectable

      Audio Outputs
    • Output Type: Balanced line level with automatic muting on loss of AES67 signal
    • Output Volume -60 dB to 0dB in 1 dB steps
    • Maximum output level: +20dBu (@ 0dB volume)

      Audio Performance
    • EIN -119bBu (+45dB gain)
    • Output Noise: <-85dBu @ 0dB gain
    • System THD: <0.05% at any gain, input signal 3dB below maximum

      Audio Network
    • Physical Level: Standard Ethernet
    • Connector: Single RJ-45
    • Cable Quality: CAT-5e or better
    • Transmission Speed: 100 Mbps
    • Supported Sample Rates 44.1kHz, 48kHz
    • Minimum Dante Network Latency: 1ms

      Power Requirements
    • PoE 802.3af PoE PD compliant
    • Power Consumption: < 5W Max
    • Cable Quality: CAT-5e or better

      Physical Dimensions
    • Width: 6.45"
    • Height: 1.06"
    • Depth: 3.45"
    • Weight: 0.8 lbs.

      Product Compliance
    • FCC CFR 47 Parts 15B Class A, EN55011, ICES-003, CE (EN55022 / EN55024), RoHS, REACH
     
  • Warranty:

    • 5 Year
     

UNAIO2X2+ - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov